Derby Rules 2010

Our Pack Derby will be Sat. March 6th, final registration begins at 4 p.m., racing begins at 5:30 p.m. We will eat a hot dog dinner while waiting for cars to be registered. Wolves & Bears bring chips, Webelos bring desert.

The district Derby is April 24th. More info. to come.


NOTE:
Only OFFICIAL CUB SCOUT Pinewood Derby Cars are allowed. This means the axles, wheels and wood block must come from the official kit(s).
1. Material: 
Race cars shall be constructed for this event from the parts contained in the 2009 Official Grand Prix Pinewood Derby Kit, (hereinafter referred to as "the kit") as sold by the BSA Scout Stores.
2. Weight: 
Race cars may weigh no more than five (5) ounces (total weight) as determined on the official scales during the pre-race check-in.  Weight can be adjusted if desired prior to check-in. The pre-race check-in will take place on dates to be determined.
3. Wheels and Axles: 
* The wheels shall turn about the axle nails from the kit. 
* WHEELS and/or AXLES from OTHER than OFFICIAL Grand Prix Pinewood Derby Kit WILL DISQUALIFY THE CAR!!! 
* The axle nails shall be firmly affixed to the wood of the car body.
* It must be obvious to the judges that the wheels and nails from the kit are being used. 
* All Wheels must lie flat on a flat and smooth surface. If they do not, the car will be disqualified. (DO NOT PUT YOUR NAILS IN AT AN ANGLE! 
* NOT USING CURRENT BSA WHEELS ... will disqualify your CAR. 

>>>> THESE ARE IMPORTANT RULES -- FOLLOW THEM or be ready to modify your car to meet these RULES. <<<<
4. Size: 
Race cars may be no longer than 7 inches, nor wider than 2-3/4 (2.75) inches, as determined by the official gages during the Registration and Inspection. Underside clearance of at least 3/8 (0.375) inches and inside wheel to wheel clearance of at least 1-3/4 (1.75) inches is required, so that the car will run on the race track. Adequate clearance is the responsibility of the race car builder.
5. Weights and Attachment: 
Weight may be added to the car and will be considered part of the car for purposes of all measurements. Weights must be attached to the car body only (cannot add weight to wheels). "Weight" is considered to be any material on the car that is not provided in the kit. All weight must be securely fastened to the car, e.g. by permanent glue, nails or screws, but not by "sticky substances", e.g. tape, or tack spray. Weights shall be passive, i.e. non-moveable, non-magnetic, non-electric, non-sticky, etc. Sticky "coin" envelopes are not allowed -- even if bought at the Scout Store.
Weights attached with double backed "foam tape" are being allowed this year on a trial basis. If in the opinion of the judges weights are adequately attached by tape ... they may be allowed ... try to find some way other than tape to attach weights to the car. Since we have had cars with transparent tape, masking tape and even trusty old duct tape come loose after official check-in. DO NOT USE TAPE (unless it is double backed foam ... trying it for one more year).
6. Wheel Treatment:
Wheel treatment (hub and tread smoothing and polishing) may not result in substantial removal of mass nor in reducing the wheel width from the original kit wheels. No mass can be ADDED to the wheels in any form. Some of the original "tread marks" on the wheel face must remain intact, i.e. apparent to the inspector. Wheels may not be machined to a beveled condition and the portion of the wheel surface that contacts the track must remain parallel to the axle. Diameter of the wheel must be a minimum of 1.170 inches, this allows for removing any burrs that may have occurred during the molding process. Grooves in the wheels are NOT allowed. Any wheel surface modified to be different than a flat smooth wheel surface parallel to the track will be a basis for disqualification.
7. Unacceptable Construction: 
The following may NOT be used in conjunction with the wheels or axles: hubcaps, washers, inserts, sleeves, springs, bearings.
8. Gravity Powered: 
The race car may not be constructed or treated in such a way that the track's starting mechanism imparts momentum to the car. (For instance, this provision disqualifies cars with sticky substances on the front of the car and protrusions which may catch on the starting pin.)
9. Lubricants: 
Only dry lubricants such as graphite or powdered Teflon "white lube" will be allowed for lubricating the wheels. Lubricants may not foul the track. There will be an opportunity to add lubricant at check-in. Once the car is checked in, no additional lubrication will be allowed.
10. Car Damage: 
During the race, should a car become damaged, a repair station will be provided. Participants will be able to repair their car. Only damage that resulted during the District race can be repaired (no improvements will be performed).
11. Height Limitation: 
We recommend no more than 3 1/2 inches. 

Remember -- The taller the car, the more likely something will get broken.
12. Questions about the Rules: 
      a. Judges have the final say about rules!!! 
      b. In case of conflicting rules ... District rules govern the Race! 
      c. If any one thinks the judges are wrong ... Judges have the final say about rules!!!

The Uniform Bank is open Sat 10am-2pm Both Parent and Scout must be there. It's in the back of the store.

Beehive Books & More
10213 24th St E
Edgewood, Wa 98372
Phone 253-927-Hive



Tacoma Scout Shop
253-682-2215
4802 S. 19th St
Tacoma, Wa 98405

Fund Raiser

We earned $907. Great job everyone!!

Den Meetings move to Thursdays in January

Hi,

I just wanted to let you know that all ward youth meetings will be on Thursdays at 6:30p.m. beginning in January.

Bear Happenings!

The Bears made Piggies and had Storytime with Bishop Danielson.

No Cub Scout meetings Nov. 24th

We will not be having any meetings November 24th.

Cub Scout Service Project

Bring rakes, push brooms & tools to dig weeds;

Meet at the Dupont Park -n- ride at 9am

About 11 a.m. meet at Seller's Park for Hot chocolate, goodies and a short Pack meeting. If we’re wet of freezing, we’ll meet at the Clark’s home instead for hot chocolate.
Contact Robbie Gale for anything that comes up.


Heidi Manwarring; Wash windows, rake leaves
*Parker Danielson is assigned to her.

Jami Waite; Rake leaves, pull weeds
*Note those assigned to her may need to help at the Manwarring's.

Teresa Gaskill: Rake leaves, fix stone placement

Cindy Bitt; Spread beauty bark
*I’m waiting for a confirmation. She was a maybe.



Cubs who have said they will help;
Parker Danielson; 9 -10 am
Cameron Gale; 9am -12 pm
Adam & Harris
Dallin Skinner
Anthony & Alex Clark